Faders; Time Events - Tascam DM-24 Release Notes

DM-24 version 2.0—Release notes—GPI functionality
• (pressing the transport
PLAY
the event)
• (pressing the transport
STOP
the event)
• (pressing the transport
REC
ger the event)
• (pressing the transport fast-forward key will
FFWD
trigger the event)
• (pressing the transport rewind key will trigger
REW
the event)
• (pressing the DM-24's
INPUT ALL
will trigger the event).
The events triggered by these key presses can be any
of the following:
Off->On On->Off
Select the type depending on the unit (active high or
active low). Press
ENTER
and the settings.
TYPE
NOTE
For all keys triggering GPI events, the event is triggered
when the key is active (the indicator lights), except in
the case of MUTE keys which are being used to un-
mute a channel. In this last case, it is the key release
that triggers the GPI event.
18
TASCAM DM-24 2.0 release notes
key will trigger
PLAY
key will trigger
STOP
key will trig-
RECORD
key
ALL INPUT
Momentary Momentary
on off
to confirm both the
ITEM
The types (the 32 channel faders, the

Faders

FADER
aux and buss faders, and the master fader may also be
used to trigger events) are slightly more complex.
The illustration below shows the fader options (when
the fader is pulled up from the minimum position,
and then when it is pulled down to the minimum
position):
Fader Pulses
Fader Transitions
Fader movement in either direction can also be used
to trigger pulse events (as shown in the illustration
below):
Fader movement (pulses)
When a port type has been set as a

Time events

on the
TIME EVENT SETUP
added to an event list as shown on the right of the
screen.
GPI time events can be entered on the fly for future
replay by pressing the
CAPTURE TC
when timecode is running. Alternatively, the dial can
be used for setting and editing time values.
Scroll through the list with POD 4.
half of the screen, it can be
on-screen button