Hui Emulation - Tascam DM-24 Release Notes

DM-24 version 2.0—Release notes—GPI functionality
On the page, the filtering of MIDI
MIDI/MC SETUP
Control Change messages can now be carried out
independently for external control (
Mix parameters (
Mix Parm
pendently for In and Out for both types of Control
Change message.

HUI emulation

The DM-24 is now able to emulate the Mackie
HUI™ device, and can therefore act as a controller
(pans, sends, faders and mutes) for various DAW
applications (e.g. ProTools, Digital Performer and
Nuendo) via MIDI.
NOTE
This is not a 100% emulation of every one of the
Mackie HUI functions, and there is no guarantee,
despite our best efforts, that an external unit that is
controlled by a Mackie HUI will behave identically in
every circumstance as the same unit controlled by the
DM-24's HUI emulation.
20
TASCAM DM-24 2.0 release notes
) and
EXT.CTRL
). These can be set inde-
The HUI "device" is a closed loop MIDI device, and
is selected from the machine control list (if the closed
loop is not detected, the display shows a cross for the
device type, rather than the double-headed arrow
usually used to denote a closed loop device. There is
one parameter which may be set here—the MIDI
channel (from through
1 16
The setup enables MIDI to be received by the HUI
emulation as well as setting the ID of the device.
HUI transport emulation, etc. can be enabled or dis-
abled in this screen and the external control screen
(described below) enables other functions.
As with other machine control devices, the
button jumps to the special screen from which the
HUI is controlled:
).
SCREEN