Assignable Inserts; Surround Mode; Lpf On The Boom Channel; Center Channel Percentage - Tascam DM-24 Release Notes

Digital mixing console version 2.0

Hide thumbs Also See for DM-24:

Table of Contents

DM-24 version 2.0—Release notes—Surround mode

It is now possible to select individual (mono) Aux

send busses for output in this way. In this case, the

left channel of the digital output is used for the Aux

send.

Assignable inserts

The assignable inserts can now be used with the L-R

stereo buss.This allows any effect you are inserting

to be "monitored" directly (this can be very useful

when mixing to a digital recorder).

This allows you to send only those frequencies below

those selected on the LPF to the boom (LFE) chan-

nel. The choices are

80Hz

120Hz

OFF

It also allows you to send a compressed stereo signal

to digital outputs 1 and 2.

the amount of signal allowed into the center channel

(set as a percentage). If this center channel is

reserved for dialog, you may not want effects intrud-

ing into it, and you may want to reduce the level sent

to this channel for these effect tracks (an on-screen

switch is also provided).

The switch and percentage level are shown in the

screen above.

TASCAM DM-24 2.0 release notes

You can now set

Table of Contents