Top closure
– Remove the pressure-fitted cap
which plugs hole D behind the right-
hand seat and use the screwdriver to
unfasten the hydraulic unit valve in
order to relieve the oil pressure in
the circuit.
4
D
96
Top
– Remove the pressure-fitted cap
which plugs hole E behind the left-
hand seat and, using the screwdriver
or wrench B, press until the top
covering locks are released (you may
have to tap the screwdriver or
wrench to release the locks).
E
– Lift the top covering F manually and
keep it open while extracting the top
from its seat.
WARNING Keep the top covering
lifted manually to prevent it from re-
closing.
– Remove the top from its seat until
the front part is near the windshield
frame.
F