Maserati Spyder Owner's Manual page 162

3) Remove the bulb holder M turning it
in an anti-clockwise direction.
4) Remove and replace the bulb.
5) Refit the bulb holder turning it in a
clockwise direction.
6) Refit the direction indicator
inserting first the retaining tab on the
rear part and then pressing the front
part until hearing the spring clip click
into position.
WARNING Proceed with care when
removing the side direction indicator
light to avoid damages to the car body
or to the indicator itself.
6
162 If an exterior light goes out
Third stop light
In order to replace the bulb, the lens
unit has to be removed. It is therefore
recommended that you contact the
Maserati Service Network.
M
License plate lights
To replace the license plate light bulb
(C 5W):
1) Back off the fastening screws for the
lens/bulb holder unit.
2) Remove the unit and replace the
bulb.