Table of Contents
Advertisement
LED
Power
2G
3G
Rev 1.3 May. 09
State
Indicates
Off
Indicates one of the following states:
•
•
•
Solid Blue
The power is on, the modem is working normally.
Blinking Blue
The firmware is being updated.
Do not remove the modem from the computer.
Blinking Amber
The modem is searching for service (initializing).
Solid Amber
Modem error—either the modem is having a problem initializing
(searching for service) or is offline because of a failure.
Contact your service provider.
Off
The modem is unable to detect 2G service.
Blinking Amber
The modem has detected a 2G network (EDGE, GPRS, GSM) and is
ready to connect.
Solid Amber
The modem is connected to a 2G network and is able to send and
receive data.
Off
The modem is unable to detect 3G service.
Blinking Blue
The modem has detected a 3G network (UMTS, HSPA) and is ready to
connect.
Solid Blue
The modem is connected to a 3G network and can send and receive
data.
ExpressCard modem features
Power LED
2G LED
3G LED
SIM card slot
LED operation
The ExpressCard modem has three LEDs that show the current
status of the modem.
The modem is not inserted in the computer.
The computer is off or in "suspend and resume" mode.
The modem radio has been turned off using Watcher or another
connection client.
Using your HSPA Modem
23
Advertisement
Table of Contents
