Multitech ISI5634UPCI Quick Start Manual page 6

ISI Quick Start Guide
3.
Carefully remove the ISI Card from its antistatic bag, handling it only by the
mounting bracket and edges. Do not touch the gold-plated connectors along
the bottom edge. (You may want to save packaging for possible future use.)
4.
Locate the unused PCI slot you will be using for your ISI Card and remove
the slot cover according to instructions in your computer's manual.
5.
Install the ISI Card into the selected expansion slot in the same manner as
any other add-on card, as instructed in your computer's documentation.
6.
Fasten the retaining bracket to the computer chassis and replace cover on
the computer.
7.
Cabling. The -4 ISI Server card has one RJ-45 receptacle and one fan-out
cable; the -8 ISI Server card has two RJ-45 receptacles and two fan-out
cables. Each fan-out cable extends connections for four modems from the
RJ-45 plug to four RJ-11 plugs. Each RJ-11 plug should then be attached to
a phone line receptacle. Attach the RJ-45 connector into the appropriate
RJ45 receptacle on the ISI Server card.
To view a pin out diagram of the ISI Server Card Fan-Out Cables, see Appendix A
of the User Guide. A setup graphic is shown on the next page.
6
ISI5634UPCI-8
ISI9234PCIe-8