Safety Warnings; Windows Installer - Multitech ISI5634UPCI Quick Start Manual

Safety Warnings

•
This product must be installed by a qualified service person.
•
When installing or servicing this product, the phone lines must be
disconnected to remove the risk of hazardous voltages.
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
•
This product is to be used with UL and CUL listed computers.
•
Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
•
Use caution when installing or modifying telephone lines.
•
Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electrical shock from lightning.
•
Do not use the telephone to report a gas leak in the vicinity of the leak.
•
To reduce the risk of fire, use only 26 AWG or larger telecommunication line
cord.
•
This product must be disconnected from its power source and telephone
network interface when servicing.

Windows Installer

Your product CD contains an installer program for current Windows operating
systems (Windows XP and newer only) that should be used before installing your
ISI card. Should you happen to install your ISI card before using the installer
program, please follow the directions in the User Guide on the product CD for your
particular version of Windows.
1.
Insert the product CD into a compatible drive. Do not install your ISI
card yet.
2.
Click on the Preinstall Windows Drivers button from the main splash
screen of the CD.
3.
Click the button that matches your operating system [32-bit or 64-bit].
You can see what type of system you are using from the Control Panel |
System screen.
a. Windows may pop-up a User Account Control window. Select the
YES button to continue with the driver installation.
ISI Quick Start Guide
3