Hardware Installation Procedures - Multitech ISI5634UPCI Quick Start Manual

Hardware Installation Procedures

Before inserting your ISI card into a PCI slot, please run the Windows Installer
program from your product CD. This makes all Windows operating systems
installations faster than the manual methods described Chapter 3 of the User
Guide.
To install the ISI card into your PCI-bus computer, follow the steps presented
below.
1.
Turn off your computer, remove the power cord and any peripheral
equipment connected to it.
2.
Remove the cover of your computer as instructed in your computer's
documentation.
Before handling the ISI Card, discharge any static in your body by touching a piece
of grounded metal such as the computer chassis. Electrostatic discharge (ESD) is
the release of stored static electricity that can damage electrical circuitry or
components. Static electricity is often stored in your body, and discharged when
you come in contact with an object of a different potential.
Perform the procedure below described in this section only at an ESD workstation
using an antistatic wrist strap. If such a station is not available, you can provide
some ESD protection by wearing an antistatic wrist strap and attaching it to a metal
ground screw (lug).
ISI Quick Start Guide
5