Framing And Clearances; Select Fireplace Location - Outdoor Lifestyles DAKOTA-AU Installation & Operation Instructions

3

Framing and Clearances

Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Select Fireplace Location
When selecting a location for your fireplace it is important to consider the required clearances to walls (See Figure 3.1).
Not e: For ac tual f ireplac e
dimensions refer to Section 12.
E
Figure 3.1 Fireplace Locations
This appliance shall be used in an above ground open-air situation with natural ventilation,
without stagnant areas, where gas leakage and products of combustion are rapidly
dispersed by wind and natural convection.
Outdoor Lifestyles by Hearth & Home Technologies Inc. • Dakota-AU • 4036-914 Rev H • 6/11
1.47 M
D
2.08 M
B
C
A
629 mm
Fire Risk
Provide adequate clearance:
• Around air openings.
• To combustibles.
• For service access.
Locate fireplace away from traffic areas.
Note: If this surface is
inside the building's
warm air envelope...
E
A
D
B C D
1.22 m 1.25 m 13 mm
WARNING
...then this surface
must be an exterior
wall system.
B
C
E
38 mm
D
5