Framing And Clearances; Selecting Appliance Location - Outdoor Lifestyles Twilight-II-B Owner's Manual

5 5

Framing and Clearances

A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffi c and away from furniture and draperies.
C*
Millimeters
Figure 5.1 Appliance Locations
Outdoor Lifestyles by Hearth & Home Technologies, Inc. • Twilight-II-B • 2108-900 Rev. W • 5/12
GLASS
B
NOTE: Appliance may be installed flush on exterior, interior or
anywhere in between. Any projection of the appliance interior
or exterior must have a properly constructed chase surround-
ing the appliance. The exterior must have proper insulating,
flashing and finishing to ensure an insulated envelope.
WARNING! Risk of Fire! The exterior side of the TWILIGHT-II-B
CANNOT be recessed into the framing.
D
GLASS
C* = 24 INCH (MAX.)
GLASS
A B
Minimum Minimum Minimum
Inches 43 1/2
1092 13
* = C dimension may be any length from 0 to 24 inches.
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
WARNING! Risk of Fire! The exterior side of the TWI-
LIGHT-II-B CANNOT be recessed into the framing.
GLASS
B
A
E
B
FLUSH TO EXTERIOR INSULATED ENVELOPE
C*
Maximum
0 24
0 610
EXTERIOR INSULATED ENVELOPE
C* = 0 INCH (MIN.)
FLUSH TO INTERIOR
D E
Minimum -
36 43
914 1092
PROJECTION
17