Foot Platform Angle Adjustment; Swing-Away Footrests; Elevating Leg Rests - Pride Mobility Jazzy 1113 Owner's Manual

V . C O M F O R T

Foot Platform Angle Adjustment

You can adjust the angle of the foot platform with a hex key and
wrench.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the setscrew. See figure 26.
2. Loosen the nut and turn the setscrew counterclockwise
to raise the front of the foot platform or clockwise to
lower the front of the foot platform
3. Tighten the nut to secure the setscrew.

Swing-Away Footrests

Swing-Away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off of your power
chair. See figure 27.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the back of
each footrest extension.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.

Elevating Leg Rests

Elevating Leg Rests (ELRs) offer an infinite range of adjust-
ment for the leg angle and a footrest adjustment range of 12–
19 in. See figure 28.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of each
leg rest extension.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
28
A D J U S T M E N T S
Figure 27. Swing-away Footrest Adjustment
Figure 28. Elevating Leg Rests
Figure 29. Heavy Duty Drop-In Leg Rests
www.pridemobility.com
FOOTREST
EXTENSION
LEG REST
EXTENSION
ADJUSTMENT BOLT
ADJUSTMENT SCREWS
SFR RELEASE LEVER
ADJUSTMENT
SCREWS
RELEASE LEVER A
RELEASE LEVER B
ADJUSTMENT
SCREWS
LEG REST
HANGER
LEG REST
EXTENSION
Jazzy 1113 ATS