Electrical Components; Controller Connector; Ammeter; Main Circuit Breaker - Pride Mobility Jazzy 1113 Owner's Manual

I I I .

Electrical Components

The electrical components consist of the controller, the batteries, and the motors. The batteries, motors, and controller
power module (if equipped) are located on the power base assembly. The controller is located on the seat assembly.
Connectivity between the controller and the motors, batteries, and the battery charger is provided by one or more wiring
harnesses. See figures 6 and 7.
Controller Connector: This is where the controller harness connects to the power base.
Ammeter: This displays the charger's current output in amps.
Main Circuit Breaker: This is a safety feature built into your power chair. When the batteries and the motors are heavily
strained (e.g., from excessive loads), the main circuit breaker trips to prevent damage to the motors and the electronics. If
the circuit trips, allow the power chair to "rest" for approximately one minute. Then, push in the circuit breaker button, turn
on the controller, and continue normal operation. If the main circuit breaker continues to trip repeatedly, contact your
authorized Pride Provider.
Charger Power Cord Receptacle: This is where the charger power cord plugs in when the batteries need to be re-
charged.
Battery Connectors (Quick-Connectors): These provide a connection between the battery boxes and the electronics
tray.
Motor Connectors: These provide a connection between the motors and the electronics tray.

CONTROLLER CONNECTOR

(VSI SHOWN)
Figure 6. Power Base Rear View - Electronics Tray
16
Y O U R P O W E R

AMMETER

www.pridemobility.com
C H A I R

MAIN CIRCUIT BREAKER

CHARGER POWER CORD
RECEPTACLE
Jazzy 1113 ATS