Making A Sensor Activate A Different Zone - Linear DVS 1200 Installation Instructions Manual

MAKING A SENSOR ACTIVATE A DIFFERENT ZONE

Any sensor can be reprogrammed to activate
any of the Console's zones.
The sensor must have already been learned
by the Console (see "Adding sensors to the
System" for details).
Start with the Console in Test Mode.
Enter the master user code then press the
[ TEST ] button.
A "gong" and five "beeps" will sound.
The sensor status indicators will light for each
sensor programmed into the Console.
Enter the sensor number from 01-12 (you
must enter two digits, example: 5 = 05).
The sensor indicator light will flash for the
sensor number selected.
Choose a zone number from the Console Zone
Table.
Press [ HOME ], the new zone number, then
[ AWAY ]. A "bing" tone will sound.
Enter another sensor number or exit Setup
Mode by holding the [ OFF ] button for three
seconds.
PROGRAMMING INFORMATION
ZONE # SENSOR TYPE
1 AUTOMATION
2 EMERGENCY
3 PANIC
4 FIRE
5 PERIMETER
6 EXIT/ENTRY
7 INTERIOR
8 CHIME
2-BUTTON ARM/DISARM (LEFT)
9
2-BUTTON AUTOMATION (RIGHT)
2-BUTTON ARM (LEFT)
10
2-BUTTON DISARM (RIGHT)
11 ENVIRONMENTAL
24
OFF MODE
ACTIVATES AND DEACTIVATES THE AUTOMATION OUTPUT
ARMED 24-HOURS - TRIGGERS EMERGENCY ALARM
ARMED 24-HOURS - TRIGGERS SILENT PANIC ALARM
DEACTIVATED
DEACTIVATED
DEACTIVATED
LEFT BUTTON SWITCHES CONSOLE TO AWAY OR HOME
MODE (PROGRAMMING FUNCTION 50)
IF ALARM IS ACTIVE, SWITCHES CONSOLE TO OFF OR
CHIME MODE (PROGRAMMING FUNCTION 51)
LEFT BUTTON SWITCHES CONSOLE TO AWAY OR HOME
MODE (PROGRAMMING FUNCTION 50)
IF ALARM IS ACTIVE, SWITCHES CONSOLE TO OFF OR
CHIME MODE (PROGRAMMING FUNCTION 51)
ARMED 24-HOURS - TRIGGERS ANNUNCIATION ONLY
Console Zone Table
START IN TEST
TEST
HOME
AWAY
DONE
SENSOR FUNCTION IN EACH CONSOLE MODE
CHIME MODE HOME MODE
ARMED 24-HOURS - TRIGGERS FIRE ALARM
CHIME
CHIME
DEACTIVATED DEACTIVATED
CHIME
LEFT BUTTON SWITCHES TO OFF OR CHIME MODE
RIGHT BUTTON SWITCHES TO OFF OR CHIME MODE
MASTER
USER
CODE
1 GONG &
5 BEEPS
SENSOR
NUMBER
FOR ZONE
CHANGE
ZONE
NUMBER
1 BING
AWAY MODE
INSTANT BURGLARY ALARM
DELAYED BURGLARY ALARM
FOLLOWER
(INSTANT BURGLARY ALARM
UNLESS ACTIVATED DURING
ENTRY DELAY)
(PROGRAMMING FUNCTION 51)
(PROGRAMMING FUNCTION 51)