Power Button; Battery And Charging - iRobot Braava 300 Series Owner's Manual

Battery and Charging
Mode
Run Time Sweep
Mop
Charge Time
N/A
Charging
• Stand Braava on its end to access the charging port.
• P lug the adapter into a standard electrical outlet and into Braava's
charging port.
• C harge Braava until a solid blue light appears on the power button*.
• I t may take Braava a few charging cycles to reach its full capacity.
Charging Port
Charging Port
TIP: can also be charged with the Braava Turbo Charge Cradle.
Braava
See Cradle instructions for details.
CAUTION: Do not charge Braava while the Pro-Clean reservoir pad
or any wet cloth is attached. Charge using a standard 240V outlet only.
Only use the included adapter to charge Braava. Always disconnect
Braava from the adapter before cleaning.
10 Braava 300 Series Owner's Manual
Braava 320 Braava 380
up to 3 hrs up to 4 hrs
2 hrs 2.5 hrs
10 hrs 4 hrs **
2 hrs with turbo charge cradle (sold separately)
**
* The blue light indicates on average that the
battery has charged to 80% of its capacity.
Charging time and run time can be
affected by operating temperature,
floor type and other conditions.
Charging Indicators
(While Plugged In)

Power Button

Red pulsing light: Battery charging
Blue solid light: Battery charged
The NorthStar Navigation Cube
The Cube uses 2 C batteries. The battery door can be found on the bottom
of the Cube.
Please dispose of all batteries properly
by finding a recycling resource near you.
global.irobot.com 11