Maintenance - iRobot Braava 300 Series Owner's Manual

Maintenance

To keep your Braava in the best working condition, follow these maintenance steps.
Cleaning and Storing
• U se a dry cloth to wipe dust or dirt from Braava's exterior. Do not rinse or
submerge in water.
• U se a damp cloth to wipe off dust and dirt on tires. Make sure that Braava
is not plugged in and that the cloth is not dripping.
• P lace Braava on its end (handle side down) when charging or storing
between uses.
• F or long term storage remove C batteries from the NorthStar Cube.
Wheel Guard
• A s Braava cleans, debris may accumulate around the Wheel Guards.
This helps keep Braava's wheels moving freely.
• P eriodically check Braava's wheels to see if debris has accumulated and
remove as needed.
• A small notch next to the wheel allows access with tweezers or scissors if
needed to free the debris.
Access Notch
22 Braava 300 Series Owner's Manual
Pro-Clean Reservoir Pad (Sold separately for Braava 320)
• H and rinse with water in the sink to clean. Do not put the reservoir pad in
the dishwasher. Do not wash with soap.
• L et dry completely before re-attaching to Braava after cleaning is
complete.
• T he wick is designed for repeated use and includes antimicrobial material.
Do not remove the wick cap between cleanings.
• I f the wick cap becomes dirty or shows wear, it can be replaced.
• R emove the wick cap by pulling on the side rubber tab.
• R eplace with a new wick cap, pressing firmly into place to create a
tight seal to prevent leaking.
global.irobot.com 23