Power Button - iRobot Braava 300 series Owner's Manual

Turbo Charge Cradle
(Compatible only with Braava 380)
• Plug the adapter into a standard electrical outlet and plug the other end
of the cord into the power jack on the Cradle.
• One blue light will appear on the front of the Cradle.
• Place Braava on the Cradle to charge.
• Charge Braava for approximately 2 hours or until a solid blue light
appears on Braava's power button.
• Remove Braava from the Cradle before applying cleaning cloths or the
Pro-Clean Reservoir Pad.
• Charging time and run time can be affected by operating temperature,
floor type and other conditions.
1
Power Jack
1
2
3
Charging Indicators
(While Plugged In)

Power Button

1
Red pulsing light: Battery charging
Blue solid light: Battery charged
Please dispose of all batteries properly by finding a recycling resource near you.
2
Charging Contacts
TIP: Braava's adapter is compatible with the Cradle
and can be plugged into either Braava directly
or into the Turbo Charge Cradle.
CAUTION: Do not charge Braava while the
Pro-Clean reservoir pad or any wet cloth is
attached. Charge using a standard outlet only.
Only use the adapter included with the Braava
2
380t. See Braava manual for safety warnings
and instructions.
Compatible only with the Braava 380t.
3
LED indicator
The NorthStar
Navigation Cube
The Cube uses 2 C
batteries. The battery
door can be found on the
bottom of the Cube.
global.irobot.com
11