Continuous Cleaning; Power Selector - iRobot H1 Owner's Manual

Cleaning
To start cleaning, hold down on
EN
the trigger to start the vacuum.

Continuous Cleaning

• Your vacuum can be operated without the need to continuously hold
down the trigger. To enable continuous cleaning, press the continuous
cleaning switch until it clicks into place.
• To disable continuous cleaning, push the switch in the opposite direction
until it clicks into place.
Note: After each use, please ensure that the continuous cleaning switch is
disabled. Failure to do so may cause battery failure.
3 For more information, visit global.irobot.com

Power Selector

Your vacuum has two power modes -
High Power & Low Power. The vacuum
will begin in High Power. To select
Low Power press the power selector.
Pressing the power selector a second
time will return the vacuum to High
Power.