Table of Contents What’s In the Box Robot Anatomy Setup Guide Choosing the Right Braava jet ™ How iRobot Braava jet Cleans Tips for Best Performance Troubleshooting Regular Robot Care Safety and Compliance Information Braava jet™ Owner’s Guide...
Robot Anatomy Top View - Front Top View - Back Handle Pad Eject CLEAN Button Button Tank Cap Precision Jet Spray Battery Nozzle Braava jet Cleaning For Customer Care go to www.irobot.com/support Braava jet™ Owner’s Guide...
Page 5
Robot Anatomy Bottom View iRobot Braava jet Cleaning Pads Wet Mopping Front Cliff Sensors (Blue) Damp Sweeping Pad Reader (Orange) Pad Tracks Dry Sweeping (White) Wheels Rear Cliff Sensors Washable Wet Mopping (Blue) (Included with select models. Also available for purchase as an accessory.)
2 hours before using the robot. Battery Tip #2: iRobot also offers additional batteries and chargers as accessories for purchase, so you can always have a charged battery ready to go. For Customer Care go to www.irobot.com/support Braava jet™ Owner’s Guide...
• Your robot comes with a sample pack of Wet Mopping, Damp Sweeping, Mopping and Dry Sweeping Braava jet cleaning pads. (Blue) • Braava jet will automatically recognize the pad and adjust its Cleaning Agent cleaning behavior based on the pad you choose. Damp...
Page 8
Fill the Robot with Water • Fill the robot if you choose Wet Mop or Damp Sweep. • Slide a Braava jet pad into the track on the bottom of the robot until it clicks into place. • Lift the robot handle to find the tank cap and lift and swivel it open.
Page 9
• The robot will clean up to 150 ft while mopping, and up to 200 ft while damp or dry sweeping.* • Braava jet will finish by cleaning the edges and perimeters of your room, furniture and toilets. Cleaning Tip: When it has...
Page 10
• Remove the battery and put it in the wall charger so it can charge for the next cleaning. • Empty the water tank before storing the robot. • Braava jet can be stored wheels-down or on its side with the battery side down. For Customer Care go to www.irobot.com/support...
Page 11
Choosing the Right Braava jet™ Pad Choose the right cleaning pad OVERVIEW RECOMMENDED FOR for your cleaning needs. Stains* Pad Type Cleaning Motion and Wetness Level Fresh Dust Hair Dirt Scent Mopping (Blue) Cleaning Agent Damp Sweeping (Orange) Cleaning Agent...
Page 12
How iRobot Braava jet™ Cleans Braava jet is designed to intelligently navigate and clean typical kitchens and bathrooms each time it runs, up to 150 ft while wet mopping and up to 200 ft while damp and dry sweeping.* Where to Place the Robot in a Room Place the robot in the lower left of the area you want it to clean.
How iRobot Braava jet™ Cleans For Customer Care go to www.irobot.com/support Braava jet™ Owner’s Guide...
Page 14
Braava jet adjusts its cleaning pattern based on the • Braava jet does not spray furniture or walls. Before the robot sprays, it will back up to ensure it’s only spraying a portion of the floor it knows is clear.
Page 15
CLEAN button until all indicators turn off. Cleaning Tip: You can also use Virtual Wall Mode to divide a larger room into smaller areas to help Braava jet clean more efficiently. For Customer Care go to www.irobot.com/support Braava jet™ Owner’s Guide...
• Your robot will only run with Braava jet Pads, which are specifically made for the robot. • Braava jet cleans best on smooth hard surfaces and may not perform as well on uneven tiles, heavily waxed floors or rough surfaces like slate or brick which may snag the cleaning pads.
Customer Service at (877) 855-8593. Water Level Troubleshooting If you encounter problems with the amount of water Braava jet uses on your Repeating Error Messages floors in wet mopping or damp sweeping modes, contact Customer Service at If your robot remains on after an error occurs, press the bumper toward the body (877) 855-8593.
Regular Robot Care Follow these tips to keep your iRobot Braava jet Cleaning the Wheels Pull off any visible debris or hair that gathers around the wheels. running at peak performance. Cleaning the Cliff Sensors and Pad Reader Clean the sensors on the bottom of your robot with a damp cloth.
Page 19
Cleaning the Precision Jet Spray Nozzle Use a damp cloth to lightly wipe off any dirt on its body or bumper. Wipe clean with a damp cloth. Precision Jet Spray Nozzle For Customer Care go to www.irobot.com/support Braava jet™ Owner’s Guide...
Page 20
50 times* before replacing. If using a washing machine, wash on warm cycle and air dry. Do not wash with delicates. *Tested in washing machine. Do not wash with delicates. For Customer Care go to www.irobot.com/support Braava jet™ Owner’s Guide...
• Be aware that floors may be slippery after wet cleaning with Braava jet. SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED • Braava jet operates quietly. Take care when walking in the area the robot is SERVICE PERSONNEL. PLEASE ENSURE VOLTAGE RATING cleaning to avoid stepping on it and tripping.
Page 22
• Braava jet has electrical parts. Do not submerge it in water. Clean with a cloth can leak into the groundwater and get into the food chain, damag- dampened with water only.
• For replacement battery pack, visit www.irobot.com. • If you need to ship your Braava jet™ lithium ion battery for any reason, contact • Always charge and remove the battery from your robot before long-term storage or Customer Care for shipping instructions and appropriate labels.
Page 24
• Changes or modifications not expressly approved by iRobot Corporation could - Consult the dealer or an experienced radio/TV technician for help. void the user’s authority to operate the equipment.
Need help?
Do you have a question about the Braava jet and is the answer not in the manual?
Questions and answers