Cleaning
To start cleaning, hold down on
EN
the trigger to start the vacuum.
Continuous cleaning
• Your vacuum can be operated without the need for you to continuously
hold down the trigger. To enable continuous cleaning, press the
Continuous Cleaning Switch until it clicks into place.
• To disable continuous cleaning, push the switch in the opposite direction
until it clicks into place.
Note:
After each use, please ensure that the Continuous Cleaning Switch is
disabled. Failure to do so may cause battery failure.
3
For more information, visit global.irobot.com
Power Selector
Your vacuum has two power modes –
High Power and Low Power. The vacuum
will begin in High Power. To select Low
Power, press the Power Selector. Pressing
the Power Selector a second time will
return the vacuum to High Power.
Need help?
Do you have a question about the H1 and is the answer not in the manual?