Care And Maintenance; Hand Washing - iRobot Roomba Combo j9+ Owner's Manual

Care and Maintenance

Care and Maintenance Instructions for Your Robot
To keep your robot at optimal performance, make sure you periodically
EN
perform the following basic care & maintenance.
There are additional instructional videos in the iRobot Home App. If you
notice the robot picking up less debris from your floor, empty the bin, clean
the filter and clean the brushes.
Part Care Frequency
Mopping Pad Clean after a mopping job
Bin Wash bin as needed
Filter Clean once a week (twice a
week if you have a pet). Do
not wash.
Front Caster Wheel Clean every 2 weeks
Edge-Sweeping Brush Clean once a month (twice a
and Multi-Surface month if you have a pet)
Brushes
Full Bin Sensor Clean every 2 weeks
Charging Contacts Clean every 2 weeks
Sensor, Camera Window Clean once a month
and Pad Shelf
Note: iRobot manufactures various replacement parts and assemblies. If you think
you need a replacement part, please contact iRobot Customer Care for more
information.
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
8 For more information, visit global.irobot.com
Cleaning the Mopping Pad

HAND WASHING

Thoroughly wash the pad with
warm water.
Replacement Frequency*
After 30 washes.
Every 2 months
Every 12 months
Emptying the Bin
Every 12 months
1
-
-
-
Note: You can clean your mopping pads two ways: either by hand washing, or in a
washing machine.
2
Press bin release Open bin door to
button to remove empty bin.
bin.
MACHINE WASHING
Wash using the warm cycle, then air
dry. Do not put in dryer. Do not wash
with delicates.
3
Place bin back in
the robot.