Troubleshooting Chart - Sharp DK-E7P Operation Manual

Troubleshooting chart

Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following
before calling your authorized SHARP dealer or service center.
General
Symptom Possible cause
When a button is Set the unit to the power
pressed, the unit does stand-by mode and then
not respond. turn it back on.
No sound is heard. Is the volume level set to
minimum?
2009 September 25
iPod and iPhone
Symptom Possible cause
No sound is produced. The iPod or iPhone is not
No image appears on the playing.
TV/monitor. The iPod or iPhone is not
properly connected to the
unit.
Is the AC/DC adaptor of the
unit plugged in?
The video cable is not
properly connected.
The TV/monitor's input
selection is not properly set.
The iPod TV out feature has
been not set to output video.
iPod or iPhone will not The iPod or iPhone is not
charge. making full contact with the
connector.
The main unit is using
batteries as power supply.
rd
Using iPod (3 generation).
The iPod or iPhone is not
supported. Refer to page 7
for compatible models.
"This accessory is not The iPhone battery is low.
made to work with Please charge the iPhone.
iPhone" appears on iPhone not properly docked.
iPhone screen.
DK-E7P_A6_EN_SCEE.mif
DK-E7P
ENGLISH
E-10