Assembly - NordicTrack NTEX3196.3 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench and Phillips
screwdriver .
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST near the end of this manual. The number fol-
lowing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preat-
tached. If a part is not in the hardware kit, check to see if it has been preattached.
M4 x 12mm
M10 Split M4 x 16mm M4 x 19mm
Screw (64)–1
Washer (55)–3 Screw (54)–6 Screw (47)–2
M6 x 10mm M6 x 30mm Button M10 x 50mm Button
Screw (60)–2 Screw (46)–4 Screw (48)–3
M10 x 85mm Button
Screw (56)–4
1. Attach the Front Stabilizer (2) to the Frame (1) with
1
two M10 x 85mm Button Screws (56).
1
2
56
5