Table of Contents
Advertisement
1. Turn the Ignition ON and press the Override/Program button 5 times. After a slight delay, the system will chirp and
flash the lights 5 times.
2. Within the next few seconds, press the Override/Program button [again] the number of times that corresponds to
the feature list below. The siren and horn will chirp for each button press. DO NOT LOSE COUNT!!
3. When you get to the desired option number, quickly press the appropriate button on the remote control according to
the chart below. Button 1 gives a single light flash / chirp, Button 2 gives two light flashes / chirps, and Button 3
gives three light flashes / chirps.
4. Turn Ignition Off. System chirps and flashes the lights 3 times on exit. When you are finished customizing options,
check operation.
PROGRAMMING OPTIONS CHART
Option #
OPTION DESCRIPTION
1.
Factory Horn Chirps Pulses
2.
Passive Arming /
3.
Ignition Controlled Locks
5/60 Second
4.
Door Open Warning
5.
Active Re-Arm
6.
Double Unlock Pulse
7.
Disarm with trunk pop
8.
Door Lock Pulse Time
9.
Type of Carjack Protection
10.
Carjack Feature
11.
Parking Lights on with disarm
12.
Passive Lock
OPTION PROGRAMMING
BUTTON 1
LOCK
Pulse with trip
only
ON
*ON*
5 Sec.
*Enabled *
*Disabled *
Disable
*0.75 Sec.*
*Active *
*Disabled *
*Enabled *
ON
8
* = Default Settings
BUTTON 2
UNLOCK
Arm Disarm Chirps
*Arm Disarm Warn Chirp
& Pulse with trip
*OFF*
OFF
Lock Only (no unlock)
*60 Sec.*
Disable
Enable
*Enabled*
3 Sec.
Active & Passive
Enable
Disable
*OFF*
BUTTON 3
SILENT X
& Pulse with trip
Full-Time
Advertisement
Table of Contents
