Table of Contents
Advertisement
STORING THE RESISTANCE SYSTEM
To store the resistance system, first remove the Leg
Lever (not shown) from the resistance system. Secure
the Seat Carriage (44) at the position closest to the
Leg (5) (see ADJUSTING THE SEAT, on page 16).
Next, remove the Storage Knob (29) from the Row
Plate (28). Lift the Leg toward the Top Frame (37), and
tighten the Storage Knob into the side of the Row
Plate, behind the Rail (4).
To move the resistance system, stand behind the
Upright (2) and place the toe of your shoe on the end
of the Base Plate (1) and hold the resistance system
in the indicated area. Tilt the resistance system back
onto the Wheels (65) and roll it to the new location.
WARNING:
Storage Knob (29) is in place and fully tight-
ened each time the resistance system is used.
Make sure that
5
28
17
37
44
2
4
29
1
Hold in
this area
65
Advertisement
Table of Contents
