Installing And Wall-Mounting The Cisco Asa 5505 Fips Enclosure - Cisco ASA 5505 Hardware Installation Manual

Chapter 3 Installing the Cisco ASA 5505

Installing and Wall-Mounting the Cisco ASA 5505 FIPS Enclosure

Figure 3-9
Figure 3-9
To install and wall-mount the Cisco ASA 5505 FIPS enclosure, perform the following steps:
Choose a wall where you would like to mount the Cisco ASA 5505.
Step 1
Using the FIPS enclosure as a template, use a pencil to mark the location for the four plastic anchors, used
Step 2
to secure the adaptive security appliance to the wall. Make sure all the pencil marks are located in the center
as shown in
OL-18362-01
shows the FIPS enclosure for the Cisco ASA 5505.
FIPS Enclosure
Figure 3-10.
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
Rack or Wall Mounting the Cisco ASA 5505
3-11