Verifying The Memory Upgrade - Cisco ASA 5505 Hardware Installation Manual

Chapter 4 Maintenance and Upgrade Procedures
Upgrading Memory
Figure 9 Inserting the DIMM
1
2 2
When inserting DIMMs, use firm but not excessive pressure. You can cause damage to the socket.
Caution
When you finish installing new memory, replace the chassis cover.

Verifying the Memory Upgrade

You can verify that the memory upgrade has been completed successfully by entering the show version
command:
hostname# show version
Cisco Adaptive Security Appliance Software Version 8.0(0)
Device Manager Version 6.0(0)
Compiled on Mon 16-April-07 03:29 by root
System image file is "disk0:/cdisk.bin"
Config file at boot was "disk0:/main_backup.cfg"
hostname up 2 days 10 hours
failover cluster up 2 days 11 hours
Hardware: ASA5505, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
BIOS Flash M50FW016 @ 0xffe00000, 2048KB
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
4-9
OL-18362-01