Cisco ASA 5505 Hardware Installation Manual page 9

About This Guide
Short-Circuit Protection Warning
Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building
installation. Install only in accordance with national and local wiring regulations. Statement 1045
Compliance with Local and National Electrical Codes Warning
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
DC Power Connection Warning
Warning After wiring the DC power supply, remove the tape from the circuit breaker switch handle and
reinstate power by moving the handle of the circuit breaker to the ON position. Statement 8
AC Power Disconnection Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units.
Warning
Statement 246
TN Power Warning
The device is designed to work with TN power systems. Statement 19
Warning
48 VDC Power System
The customer 48 volt power system must provide reinforced insulation between the primary AC power
Warning
and the 48 VDC output. Statement 128
Multiple Power Cord
This unit has more than one power cord. To reduce the risk of electric shock when servicing a unit,
Warning
disconnect the power cord of the power strip that the unit is plugged into. Statement 137
Circuit Breaker (15A) Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
Warning
a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the
phase conductors (all current-carrying conductors). Statement 13
OL-18362-01
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
ix