Chapter 3
Installing the Cisco ASA 5505
Step 12
Pick up the Cisco ASA 5505 with the FIPS enclosure facing the wall, align the screws in the anchors with
the holes in the enclosure.
Step 13
Allowing the screws in the anchors to go through the holes in the enclosure, mount and slide down the
Cisco ASA 5505 as shown in
Figure 3-16
1
Screws
Connect the interface cables.
Step 14
For information on installing the cables
OL-18362-01
Figure
3-16.
Mounting the Cisco ASA 5505 Chassis
,
see the
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
Rack or Wall Mounting the Cisco ASA 5505
"Connecting the Interface Cables"
1
.
section
3-15