Selecting Multiple Scenes; Selecting Consecutive Scenes Together - Hitachi DZ-MV1000E Instruction Manual

SELECTING MULTIPLE SCENES

1
Press the DISC NAVIGATION button.
2
Use the joystick to select the desired scene.
3
Press the SELECT button once:
The selected scene will be framed in red and
yellow.

SELECTING CONSECUTIVE SCENES TOGETHER

1
Press the DISC NAVIGATION button.
2
Use the joystick to select
the desired scene.
3
Hold down the SELECT
button for at least one
second:
The selected scene will
be doubly framed in
yellow and blue.
4
Use the joystick to select
the last scene in the
range you want, and
then press the A
button:
The thumbnails of
scenes in the specified
range will be framed in
red, and then selected.
96
A l l Pr ogr ams 005 / 014
PLAY RAM
Yellow frame
A l l Pr ogr ams 005 / 014
RAM
ENTER CANCEL
Double frames in
yellow and blue
A l l Pr ogr ams 010/ 014
PLAY DESELECT ALL RAM
Red
frame
When scenes up to this
point are selected
Repeat steps 2 and 3 to randomly select
multiple scenes.
To cancel a selected scene, select the scene to be
cancelled, and then press the SELECT button.
To cancel all selected scenes, press the C button.
:
Note
Although scenes can be randomly selected, playback will
always start from the lowest scene number.
:
Note
•
You can know the status of scenes from the colours of
cursor and bargraph:
Cursor Bar graph
Yellow Light blue
Blue Light blue
Red Red
A
•
Pressing the button after selecting scenes will play
back only the selected scenes from the beginning of
each.
•
You can also select scenes in reverse from the last scene
in the range.
•
To release multiple selection, press the SELECT or
button after step 4.
•
Up to 999 scenes can be selected for both disc and card.
Status of scenes
Current cursor position
Range of scenes being
selected
Scenes already selected
C