Changing The Ip Address - Buffalo TeraStation User Manual

Changing the IP Address

Normally, the TeraStation's IP address is set automatically from a DHCP server on your network. If you prefer, you can
set it manually. To change the TeraStation's IP address settings, your computer should be connected to the same router
(subnet) as the TeraStation and should be running NAS Navigator2 (included on your TeraNavigator CD).
1
For a PC, double-click the [NAS Navigator2] icon on your Desktop. For a Mac, click
the Doc. NAS Navigator2 will launch.
2
For a PC, right-click your TeraStation and choose [Properties]. Select [IP Settings]. For a Mac, hold the control key
and click your TeraStation's icon, then choose [Configure] - [IP Address].
3
You've configured a static IP address for the TeraStation. To return to using DHCP, reopen the Network Properties
screen and recheck [Obtain IP address automatically via DHCP].
TeraStation User Manual
Uncheck [Obtain IP address automatically via DHCP.]. Enter the desired [IP
Address] and [Subnet Mask]. Click [OK], or [Apply] if you're using a Mac.
the [NAS Navigator2] icon in
72