Ip Address Auto Allocation Functions (Dhcp Server) Settings Example; Setting Procedure - Buffalo AirStation WLAR-L11-L Reference Manual

Buffalo wlar-l11-l network: reference guide
Hide thumbs Also See for AirStation WLAR-L11-L:
Table of Contents

Advertisement

IP Address Auto Allocation Functions (DHCP
This section explains the following IP setting example.
Addresses that can be allocated by DHCP: 192.168.0.5 to 192.168.0.24
The following address is desired to be excluded from the above address range: 192.168.0.17
The IP address allocated by the DHCP server should be the same network address as
the AirStation's IP address.

Setting Procedure

1
Refer to the "Displaying AirStation Setting Screen" section (page 6) in Chapter 1
What is Next? and display the AirStation setting screen.
2
3
4
This completes the IP address settings.
16
WLAR-L11-L Reference Manual
Server) Setting Example
Click the Custom Setup button.
Click the Automatic IP Assignment Setup
button.
Enter the following settings and click the Set button.
Automatic IP Address Assignment:(LAN)Use
Assigned IP Address: 20 units from 192.168.0.5
Deleted IP address: 192.168.0.17
The following can be set if connect-
ing to the Internet through the AirStation.
Default gateway: The AirStation's IP address.
DNS server notification:
Enter the DNS address speci-
fied by your provider.

Advertisement

Table of Contents
loading

Table of Contents