Chapter 11 Software; Nas Navigator2; File Security Tool - Buffalo TeraStation User Manual

Chapter 11
Software

NAS Navigator2

NAS Navigator2 client software is described on page 106.

File Security Tool

Before using the TeraStation with Windows 7, Vista, Windows Server 2003, or Windows Server 2008, you will need
to change the security settings to allow access to NAS devices. The File Security Tool makes these changes for you
automatically during installation from the TeraNavigator CD, or you may run it manually as described below.
Notes: • This will be installed only on Windows 7/Vista and Windows Server 2003/Server 2008.
• During the initial setup, the message, "Changing the security level. Are you sure?" is displayed. Click [Yes] and
follow the instructions on the screen to restart your PC .
1
Click [Start] - [BUFFALO] - [File Security Tool] - [File Security Tool].
The File Security Tool will launch.
Note: When "A program needs your permission to continue" is displayed, click [Continue].
2
3
The message, "Change security level" is displayed; click [Yes].
4
The message, "Would you like to restart Windows now?" is displayed; click [Yes].
Your PC will reboot.
You have changed the security settings.
TeraStation User Manual
1
Select [Change security level].
2
Click [Change].
111