Gas Oven Operation - Bertazzoni MAS486GGASXTLP Installation, Use & Care Manual

GAS OVEN OPERATION
THERMOCOUPLE SAFETY VALVE
Bertazzoni gas ovens are equipped with a
thermocouple safety device and a thermostat to
set the proper cooking temperature.
The thermocouple opens the flow of gas to the
burner only when hot. Should the flame go off,
the thermocouple will immediately close the gas
flow to the burner eliminating any risk to your
home.
For faster activation of the thermocouple, always
light the burners on maximum power. This will
allow the thermocouple to reach the optimum
temperature in the fastest time.
ATTENTION!
When using the oven for the first time it should
be operated for 15‐30 minutes at a temperature
of about 500°F/260°C (left oven) or
440°F/227°C(right oven) without cooking
anything inside in order to eliminate any
moisture and odours from the internal
insulation.
ELECTRIC IGNITION
Always keep the oven door open when lighting
Warning: Do not use the gas oven or broiler in
case of electric power failure
Open the oven door, turn the knob to the
maximum temperature setting, press well the
knob for 1 sec. And relase it, the automatic
ignition system will automatically generate the
spark for 5 seconds and will engage the
termocouple. Then check that the oven burner
flame is and remain correctly lit, and clese the
door.
Do not press the oven knob for more than 2,5
sec. otherwise automatic ignition system lock
itself and it will be necessary to retry the whole
ignition sequence; if the oven burner do not
remain correctly lit at the first attempt, open
the door of the room and wait at least 60 sec.
before to retry to ignite the oven burner.
If the oven burner flame is extinguished
accidentally during operation, turn the
temperature control knob counter‐clockwise to
the off position. Wait at least 60 seconds before
attempting to light the oven again.
27
WARNING!
the oven.
WARNING