Replacing A Drive-Panel Insert; Replacing The Drive Panel; Floppy Drive Or Media Card Reader - Dell Precision 390 User Manual

1. On the inside of the drive panel, pinch the two drive-panel insert release tabs together and pull the insert out and to the right just enough to release it
from the drive panel.
2. Set the drive-panel insert aside in a secure location.

Replacing a Drive-Panel Insert

1. Place the drive-panel insert tab into the drive-panel slot.
2. Pinch the drive-panel insert release tabs and press the drive panel insert into place.
1 drive panel
4 drive-panel insert tab in tab
slot
3. Ensure that the drive-panel insert is correctly seated in the drive panel.

Replacing the Drive Panel

1. Align the drive-panel tabs with the side-door hinges.
1 sliding plate
4 drive-panel tabs
2. Rotate the drive panel toward the computer until it snaps into place on the front panel.

Floppy Drive or Media Card Reader

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
2 drive-panel 3 drive-panel insert release tabs
insert (2)
2 sliding-plate lever 3 drive panel