Stride Sensor; Fitting; Battery Replacement; Care And Maintenance - Adidas miCoach Pacer User Manual

9.2 Stride Sensor
The Stride Sensor delivers accurate speed, distance, pace and stride rate data
during workouts.

Fitting

Option 1:
Place Lace Clip under shoe laces and attach Stride Sensor on top,
by pressing firmly into place.
Option 2:
If you have miCoach compatible shoes, remove the Lace Clip and place the
Stride Sensor in the midsole cavity.
Battery replacement
1 Remove the Stride Sensor from Lace Clip.
2 Remove the back cover of the Stride Sensor.
3 Remove the old battery by gently tapping against a hard
surface and replace with a new battery.
4 Place the cover with the battery back into the Stride Sensor.
5 Close the Stride Sensor.
Care and maintenance
The Stride Sensor is splashproof and can be used outdoors. However, take care
not to submerge the Stride Sensor and do not use the Stride Sensor inside a very
wet shoe.
Option 1
Option 2
1 2
4 5
25
3