P Airing The Stride Sensor; Heart Rate Monitor - Adidas miCoach Pacer User Manual

7.2 Pairing the Stride Sensor and Heart Rate Monitor to
your miCoach Pacer
If you have purchased the Heart Rate Monitor and the Stride Sensor as part of
the miCoach Pacer, the devices have already been paired to work together with
your miCoach Pacer.
If you purchase a new Heart Rate Monitor or Stride Sensor, the devices have to
be activated and introduced to the miCoach Pacer. This is called pairing. Pairing
ensures that your miCoach Pacer receives signals from your Heart Rate Monitor
and Stride Sensor, and enables disturbance-free exercise in a group.
Make sure you are not within (40m) of other ANT+ compatible devices, as this
could affect pairing.
1 Put on the Heart Rate Monitor and the Stride Sensor. In case the Stride
Sensor is not detected move your foot around and try to connect again.
2 Press and hold the 'Running' icon.
3 Move the 'on' switch to miCoach.
4 Continue to hold 'Running' icon button for approximately five seconds.
5 The Power icon will flash red and green to let you know it is in pairing mode.
You can now release the Running icon.
6 You will hear "Welcome to miCoach, pairing sensors" . The sensor icons will
flash red while the pacer is searching for new sensors and turn green once
each one is found.
Please note: If the battery is replaced in the Heart Rate Monitor or Stride
Sensor then there is no need to pair with the miCoach Pacer.
3
2
20