Battery Replacement - Adidas miCoach Pacer User Manual

Battery replacement
1 Place the Heart Rate Monitor on a flat and clean surface. You will need a small
Phillips head screwdriver (crosstip) to remove the four screws on the back of
the Heart Rate Monitor.
2 Remove the four screws and carefully lift the back casing.
3 Remove the old battery. Wait one minute before inserting the new battery.
4 Insert the new CR2032 battery, ensuring the + sign on the battery is facing
towards you.
5 Replace the back casing ensuring that the L and R indicators are correctly
aligned, as shown to the right.
6 Replace the four screws. Make sure you do not over-tighten the screws.
7 Check if the back and front casings are aligned. If they are not aligned properly,
you will need to tighten the screws and recheck.
1
L R
3
5
L R
L R
6
L R
24
2
4
7