Tascam PA-R200 Instruction Manual page 82

Network av surround receiver
Table of Contents

Advertisement

Make sure you've entered the correct remote control
code.
Make sure to set the same ID on both the AV receiver
and remote controller.
Can't control other components
If it's an
-capable component, make sure that the
cable and analog audio cable are connected
properly. Connecting only an
cable won't be
enough.
Make sure you've selected the correct remote
controller mode.
If you've connected an cassette tape deck to the
TV/CD IN jack, or an RI Dock to the TV/CD IN or
GAME IN jacks, for the remote controller to work
properly, you must set the input display
appropriately.
If you cannot operate it, you will need to enter the
appropriate remote control code.
To control another manufacturer's component, point
the remote controller at that component.
To control a component that's connected via
point the remote controller at the AV receiver. Be
sure to enter the appropriate remote control code first.
The entered remote control code may not be correct.
If more than one code is listed, try each one.
RI Dock for iPod/iPhone
There's no sound
Make sure your iPod/iPhone is actually playing.
Make sure your iPod/iPhone is properly inserted in
the Dock.
Make sure the AV receiver is turned on, the correct
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.
Try resetting your iPod/iPhone.
There's no video
75
Make sure that your iPod/iPhone model's TV OUT
67
setting is set to On.
Make sure the correct input is selected on your TV or
the AV receiver.
Some versions of the iPod/iPhone do not output
video.
17
The AV receiver's remote controller doesn't
control my iPod/iPhone
10, 76
Make sure your iPod/iPhone is properly inserted in
the Dock. If your iPod/iPhone is in a case, it may not
44
connect properly to the Dock. Always remove your
iPod/iPhone from the case before inserting it into the
Dock.
The iPod/iPhone cannot be operated while it's
displaying the Apple logo.
74
Make sure you've selected the right remote mode.
When you use the AV receiver's remote controller,
75
point it toward your AV receiver.
If you still can't control your iPod/iPhone, start
76
,
playback by pressing your iPod/iPhone model's Play
button. Remote operation should then be possible.
Try resetting your iPod/iPhone.
Depending on your iPod/iPhone, some buttons may
not work as expected.
The AV receiver unexpectedly selects my
iPod/iPhone as the input source
Always pause iPod/iPhone playback before selecting
a different input source. If playback is not paused, the
Direct Change function may select your iPod/iPhone
as the input source by mistake during the transition
between tracks.
iPod/iPhone doesn't work properly
Try reconnecting your iPod/iPhone.
73
En-82
Zone 2/3
There's no sound
Only components connected to analog inputs can be
played in Zone 2/3.
The Zone 2 speakers produce no sound
Powered Zone 2 cannot be used if "Speakers Type
(Front)" is set to "Bi-Amp".
Music Server and Internet Radio
Can't access the server or Internet radio
Certain network service or contents available through
this device may not be accessible in case the service
provider terminates its service.
Check the network connection between the AV
receiver and your router or switch.
Make sure that your modem and router are properly
connected, and make sure they are both turned on.
Make sure the server is up and running and
compatible with the AV receiver.
Check the "Network"settings.
Playback stops while listening to music files on
the server
Make sure your server is compatible with the AV
receiver.
If you download or copy large files on your
computer, playback may be interrupted. Try closing
any unused programs, use a more powerful computer,
or use a dedicated server.
If the server is serving large music files to several
networked devices simultaneously, the network may
become overloaded and playback may be interrupted.
Reduce the number of playback devices on the
network, upgrade your network, or use a switch
instead of a hub.
Appendix
53
95
96
66
96

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents