Table of Contents
Advertisement
HDMI
■
HDMI Control(RIHD)
Off
On
Turn this setting on to allow
components connected via HDMI to be controlled by the
AV receiver (➔ page 92).
Note
• When the setting is set to "On" and the menu is closed, the names
of connected
-compatible components and "RIHD On"
are displayed on the AV receiver.
"Search..." → "(name)" → "RIHD On"
When the AV receiver cannot receive the name of the component,
it is displayed as "Player
*
" or "Recorder
and indicates the number of components, when two or more are
received).
• When an
-compatible component is connected to the
AV receiver via an HDMI cable, the name of the connected
component is displayed on the AV receiver's display. For
example, while you are watching TV broadcasting, if you operate
a Blu-ray Disc/DVD player (being powered on) with the remote
control of the AV receiver, the name of the Blu-ray Disc/DVD
player will be displayed on the AV receiver.
• Set it to
"
Off
"
when a connected piece of equipment is not
compatible or it is unclear whether the equipment is compatible
or not.
"
• If operation is not normal when set to
On
"
"
Off
.
• Refer to the connected component's instruction manual for
details.
• When the "HDMI Control(RIHD)" setting is set to "On", the
power consumption on standby mode slightly increases.
(Depending on the TV status, the AV receiver will enter standby
mode as usual.)
control does not support HDMI OUT SUB. Use
• The
HDMI OUT MAIN instead.
• When the source equipment is connected with the
connection, it may malfunction if "HDMI Control(RIHD)" is
set to "On".
■
HDMI Through
Off
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, AUX,
TV/CD, EXTRA1, EXTRA2:
Selects the input source for which the HDMI
Through function is enabled.
-compatible
Last:
The HDMI Through function is activated on the input
source selected at the time of setting the AV receiver
to standby mode.
When enabling the HDMI Through function, regardless of
whether the AV receiver is on or in standby, both audio
and video streams from an HDMI input will be output to
the TV or other components via HDMI connection. The
HDMI indicator will be dimly-lit in standby mode. Note
*
", etc. ("
*
" shows up
that the indicator may not light under certain conditions
➔ page 50
(
This setting is fixed to "Auto" automatically when the
above "HDMI Control(RIHD)" setting is set to "On",
resulting in automatic input source selection.
Note
• Only an input source assigned to an HDMI IN via "HDMI Input"
setting is enabled (➔ page 51).
• The power consumption in standby mode will increase during the
HDMI Through function; however in the following cases, the
power consumption can be saved:
– The TV is in standby mode.
"
, change the setting to
– You are watching a TV program.
• Refer to the connected component's instruction manual for
details.
• Depending on the connected component, the correct input source
may not be selected with the setting fixed to "Auto".
• This setting is set to "Off" automatically when the "HDMI
Control(RIHD)" setting is set to "Off".
• This function is only available for the HDMI OUT MAIN jack.
).
En-65
Advanced Operations
■
Audio TV Out
Off
On
This preference determines whether the incoming audio
signal is output from the HDMI output. You may want to
turn this preference on if your TV is connected to the
HDMI output and you want to listen to the audio from a
connected component through your TV's speakers.
Normally, this should be set to "Off".
Note
• If "On" is selected and the audio can be output from the TV, the
AV receiver will output no sound through its speakers. In this
case, "TV Speaker" appears on the AV receiver's display by
pressing DISPLAY.
• When "HDMI Control(RIHD)" is set to "On", this setting is
fixed to "Auto".
• With some TVs and input signals, no sound may be output even
when this setting is set to "On".
• When "Audio TV Out" or
"
HDMI Control(RIHD)" is set to
"
On
"
and you're listening through your TV's speakers
(➔ page 15), turning up the AV receiver's volume control will
make the sound be output from the AV receiver's front left and
right speakers. To stop the AV receiver's speakers producing
sound, change the settings, change your TV's settings, or turn
down the AV receiver's volume.
• Listening mode cannot be changed when this setting is set to
"On" and the input source is not HDMI.
■
Audio Return Channel (ARC)
Off
Auto:
The audio signal from your TV tuner can be sent to
HDMI OUT MAIN of the AV receiver.
The audio return channel (ARC) function allows an ARC
capable TV to send the audio stream to HDMI OUT MAIN
of the AV receiver. To use this function, you must select
the TV/CD input selector and your TV must be ARC
capable. The ARC indicator will light when the audio
signal is detected. Default setting: "
- - - -
"
To be continued
- Quick Links:
- Connections
Hide quick links:
Advertisement
Table of Contents
