Tascam PA-R200 Instruction Manual page 52

■
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD,
EXTRA1, EXTRA2
HDMI1, HDMI2, HDMI3, HDMI4, HDMI5,
HDMI6, HDMI7:
Select the input to which the component has been
connected.
- - - - -:
Output composite video and component video
sources from the HDMI output. The video signal
coming from the HDMI output depends on the
assignments of "Component Video Input" and
"Composite Video Input".
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI7 have already
been assigned, you must first set any unused input
selectors to "- - - - -" or you will be unable to assign
HDMI1 - HDMI7 to other input selectors.
Tip
• "EXTRA1" and "EXTRA2" can be selected as input sources in
"Input" of "Quick Setup" (➔ page 46).
Note
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of "Component Video Input" and
"Composite Video Input".
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the "Digital
Audio Input". In this case, if you want to use the coaxial or
optical audio input, make the appropriate selection in the "Audio
Selector" setting (➔ page 62).
• Do not assign an HDMI IN to the TV/CD selector while "HDMI
Control(RIHD)" is set to "On" (➔ page 65), otherwise
appropriate CEC (Consumer Electronics Control) operation will
not be guaranteed.
• If you assign "- - - - -" to an input selector that is currently
selected in "HDMI Through" (➔ page 65), the "HDMI
Through" setting will be automatically switched to "Off".
• "AUX" is used only for input from the front panel.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DVD" input selector.
Here are the default assignments.
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
STB/DVR - - - - -
GAME - - - - -
PC - - - - -
AUX - - - - - (Fixed)
TV/CD - - - - -
EXTRA1 - - - - -
EXTRA2 - - - - -
■
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD,
EXTRA1, EXTRA2
IN1, IN2:
Select the input to which the component has been
connected.
- - - - -:
Output composite video sources from the HDMI
output. The upconverted output from HDMI depends
on the assignment of "Composite Video Input".
Tip
• "EXTRA1" and "EXTRA2" can be selected as input sources in
"Input" of "Quick Setup" (➔ page 46).
Note
• When composite video and component video sources are
upconverted for HDMI OUT SUB, only signals with a resolution
of 480i/576i are output and the resolution remains the same. If
your TV doesn't support this resolution, there will be no picture
(➔ page 91).
• "AUX" is fixed to the "- - - - -" option.
En-52
Advanced Operations
Composite Video Input
If you connect a component to a composite video input,
you must assign that input to an input selector.
If you switch the input to "TV/CD" with its default
assignment, the audio of "TV/CD" is output while the
video of the previously-selected source is displayed.
Here are the default assignments.
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
STB/DVR IN3
GAME IN4
PC - - - - -
AUX - - - - - (Fixed)
TV/CD - - - - -
EXTRA1 - - - - -
EXTRA2 - - - - -
■
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD,
EXTRA1, EXTRA2
IN1, IN2, IN3, IN4:
Select the input to which the component has been
connected.
- - - - -:
The composite video is not input.
Tip
• "EXTRA1" and "EXTRA2" can be selected as input sources in
"Input" of "Quick Setup" (➔ page 46).
Note
• Using these inputs as audio-exclusive allows you to enjoy audio
and video from separate inputs. Refer to "Playing Audio and
Video from Separate Sources" for details (➔ page 32).
• "AUX" is fixed to the "- - - - -" option.
• "USB" is used only for input from the front panel.