Using the Setup Menu (HOME)
RECEIVER
ENTER
/ / /
HOME
1
Press RECEIVER followed by HOME.
2
to select "Setup", and then press ENTER.
Use
/
3
Use / to select a main menu item, and then press
ENTER.
4
Use / to select a sub menu item, and then press
ENTER.
5
Use / to select a setting target, and use
change the setting.
Press HOME to close the menu.
Press RETURN to return to the previous menu.
Note
• This procedure can also be performed on the AV receiver by
using SETUP, the cursor buttons, and ENTER.
®
• During Audyssey 2EQ
Room Correction and Speaker Setup,
messages, etc., that are displayed on the TV screen will appear on
the AV receiver's display.
■
Screen Saver
If there is no video signal on the current input source and
no operation for a specific time (three minutes by
Remote
default), a screen saver automatically comes on.
indicator
Tip
• The time until the screen saver activates itself can be changed
in the "Screen Saver" setting (➔ page 64).
• The screen will return to its previous state if the AV receiver is
operated.
RETURN
/
to
En-49
Advanced Operations
Explanatory Notes
Main Menu
Speaker Setup
Speaker Configuration
■
Subwoofer
Yes
No
Main Menu
Sub Menu
Setting target
Setting options (default setting underlined)
Sub Menu
Main Menu