Connecting Your Components - Tascam PA-R200 Instruction Manual

Connecting Your Components

The on-screen menus appear only on a TV that is
connected to HDMI OUT MAIN. If your TV is
connected to other video outputs, use the AV
receiver's display when changing settings.
Connect your components to the appropriate jacks. The
default input assignments are shown below. See
"Connection Tips and Video Signal Path" for more
information (➔ page 89).
✔: Assignment can be changed (➔ pages 52, 53).
No. Jack/Port Components
*1
USB, VIDEO iPod/iPhone (video
playback)
USB *2*3 iPod/iPhone, MP3 player,
USB flash drive
DIGITAL IN
OPTICAL 1 (GAME) Game consoles
OPTICAL 2 (TV/CD) TV, CD player
COAXIAL 1 (BD/DVD) Blu-ray Disc/DVD player
COAXIAL 2 (CBL/SAT) Satellite/cable set-top box,
etc.
COMPONENT VIDEO
IN 1 (BD/DVD) Blu-ray Disc/DVD player,
RI dock
IN 2 (CBL/SAT) Satellite/cable set-top box,
RI dock, etc.
OUT TV, projector, etc.
ETHERNET Router
VIDEO IN
1 (BD/DVD) Blu-ray Disc/DVD player
2 (CBL/SAT) Satellite/cable set-top box,
etc.
3 (STB/DVR) Set top box/Digital video
recorder, etc
4 (GAME) Game console, RI dock
En-16
No. Jack/Port
AUDIO IN
BD/DVD IN
CBL/SAT IN
STB/DVR IN
GAME IN
PC IN
TV/CD IN
✔
MONITOR OUT
✔
✔
Note
✔
*1 When the USB input is selected, you can input video signals
from the VIDEO jack. Video signals input from VIDEO will
be output from the MONITOR OUT and HDMI output jacks.
✔
*2 Do not connect the AV receiver's USB port to a USB port on
your computer. Music on your computer cannot be played
✔
through the AV receiver in this way.
*3 Only the front-panel USB input is compatible with
iPod/iPhone.
*4 Connect a turntable (MM) that has a phono preamp built-in. If
your turntable (MM) doesn't have it, you'll need a
✔ commercially available phono preamp.
If your turntable has a moving coil (MC) type cartridge, you'll
✔
need a commercially available MC head amp or MC
transformer as well as a phono preamp. See your turntable's
✔
manual for details.
• With connection , you can enjoy Dolby Digital and
✔
DTS. (To listen in Zone 2/3 as well, use
• With connection , you can enjoy audio from external
components while you are in Zone 2/3.
• With connection , if your Blu-ray Disc/DVD player
has both the main stereo and multichannel outputs, be
sure to connect the main stereo.
Connections
Components
Blu-ray Disc/DVD player
Satellite/cable set-top box,
etc.
Set top box/Digital video
recorder, etc
Game console, RI dock
Personal computer
TV, CD player, cassette
tape deck, MD, CD-R,
Turntable *4 , RI dock
TV, projector, etc.
and .)