ADTRAN IP 706 Administrator's Manual page 76

Appendix A. Configuration and Line Parameters
Parameter
Speed.n.Realm
SpreHfaai
SprePageOverhead
StunServer
SubNetMask
SubsGrp.i.Type
SubsGrp.i.Uri
SubsGrp.i.Line
76
Table 12. Configuration Parameters (Continued)
Value Type
Internal, Assigns a call appearance type to a Speed
External, dial button. Used to select the facility type
PBX, to originate calls on. Other value may be
Other used for post-call setup dialing strings.
Default: Internal
ASCII Specifies the dialing prefix used to initiate
String HFAAI calls.
Default: **
ASCII Specifies the dial access code used to
String access the overhead paging system. If this
value is null, then overhead page is not
presented on the soft key as an option.
Default: *30
ASCII Specifies the FQDN or IP address of the
String STUN server, which may be required for
operating phones behind NAT routers.
N/A Indicates the network mask for the phone.
Default: 0.0.0.0
BLF Indicates the subscription type. The
subscription interval is as specified in the
FeatureExpires parameter.
Default: BLF
Request Indicates the Request URI to use in the
URI subscribe sent to the server for
subscribing to respective status group
updates. The subscription interval is as
specified in the FeatureExpires
parameter.
0 to 11 Assigns the value of x in reg.x.* to the
subscription group i. The value of i can be
1 to 6 on the IP 706 and 1 to 12 on the
IP 712 phone.
Default: 0
Copyright © 2011 ADTRAN, Inc.
ADTRAN IP 700 Series Phone Administrator Guide
Description Sources
Config File
Phone Interface
Web Interface
Config File
Web Interface
Config File
Web Interface
Config File
Web Interface
DHCP
Phone Interface
Web Interface
Config File
Web Interface
Config File
Web Interface
Config File
Web Interface
6AOSAG0001-31A