ADTRAN IP 706 Administrator's Manual page 75

IP 700 Series Phone Administrator Guide
Parameter
SntpServer
SpeakerLevels
Speed.n.Label
Speed.n.Number
6AOSAG0001-31A
Table 12. Configuration Parameters (Continued)
Value Type
Up to 3 Specifies a list of up to 3 time servers in
Comma FQDN or dotted decimal format, from
Separated which to retrieve the time and date
FQDNs or information. If from DHCP, only 1 server
IP may be specified.
Addresses Example:
192.168.0.1, 192.168.0.3, 192.168.0.4
The phone learns the time server location
through DHCP Option 42 and applies the
time zone offset available through DHCP
Option 2. If DHCP options are being used
to update the date and time on the phone,
this parameter should be commented out
in the configuration file by placing a #
before the parameter. For example,
#SntpServer.
ASCII Sets the speakerphone audio levels using
String a comma separated list of the following
settings. The following default values are
listed next to the name:
TxGain 8192
RxGain1 258
RxGain2 410
RxGain3 649
RxGain4 1029
RxGain5 1631
RxGain6 2584
RxGain7 4096
RxGain8 5785
RxGain9 7283
RxGain10 10288
Speaker DTMF Attenuation 17
Caution: Do not change these values from
their defaults unless instructed by
ADTRAN Technical Support. Doing so
could break TIA-810 compliance.
ASCII Assigns the label to a button when an
String unused button is assigned to be Speed
button. Speed members are placed on
buttons not occupied by Line or DND
buttons in ascending order of n.
Numeric Assigns the number to be dialed out when
String an unused button is assigned to be Speed
button.
Copyright © 2011 ADTRAN, Inc.
Appendix A. Configuration and Line Parameters
Description Sources
DHCP
Config File
Web Interface
Config File
Config File
Phone Interface
Web Interface
Config File
Phone Interface
Web Interface
75