Adjusting The Color (White Balance) - Hitachi DZ-BD70A Instruction Manual

HDD BD-RE BD-R RAM -RW (VR)
Adjusting the Color
(White Balance)
Light is required when recording
subjects. While the naked eye
perceives colors as they are, images
recorded by a camera may appear
redder or bluer than they actually are.
To record white colored subjects as
white images, adjust the white
balance.
The camcorder normally adjusts the
color automatically (during Auto).
Change the white balance setting
according to the recording conditions.
White balance mode
Auto (No icon appears.)
Set
When recording sunsets and
sunrises, recording in shade,
and recording a stage lit with a spot
light, you can manually adjust white
balance to match the light source or
situation.
Outdoors
To record in fine weather.
Indoor 1
To record under incandescent
light, halogen light or soft
fluorescent light.
Indoor 2
To record under bright
fluorescent light
70
Selecting a white
-RW (VF)
R CARD
balance mode
1
2
3
Note
Do not block the infrared sensor
with your hand or other things to
obtain a good cast for your
recording.
Infrared sensor
During recording pause, press
MENU.
Select "Camera Functions Setup"
"White Balance" a white balance
mode
Press the confirmation button to
confirm, then MENU to end.
The selected white balance mode
(other than Auto) will appear on
the screen (p.42).
• The white balance mode is
retained in memory even when
the power is turned off.