Table of Contents
Advertisement
Miscellaneous
Symptom
The camcorder does
Is a fully charged battery attached?
not work.
Is the camcorder powered from an AC outlet?
Connect a power source.
Press RESET, then turn on the power again.
Power does not come
on, or no operation
Has the camcorder been subjected to impact?
occurs by pressing
The camcorder could be damaged. Consult your dealer.
any button.
The date and time
Has the camcorder been left unused for a long period of
are incorrect.
time?
The internal backup memory battery may be discharged.
Connect the AC power adapter/charger to recharge it.
Pressing QUICK
• The camcorder enters sleep mode when QUICK
START does not
enter sleep mode.
• Check the following causes:
No scene can be
Is the cursor placed on the scene to be deleted?
deleted.
If the selected scene is framed in red, it can be deleted,
even if you use yellow cursor to select the scene. Check
the colors of the cursor and bar graph on the thumbnail
screen.
Disc cannot be
Did you detach the battery or AC adapter/charger before
removed.
setting the power switch to "OFF"?
(Cover will not
Isn't the camcorder powered off because the battery pack
open.)
is empty?
Is the battery charged?
Connect a charged battery or the AC adapter/charger to
the camcorder, and then turn the power switch to "OFF",
then press down the DISC EJECT switch.
Isn't the power switch set to "ON"? Turn the power
switch to "OFF", and then press the DISC EJECT
switch.
Cause and Correction
START is pressed only while in recording pause mode.
- there is no disc in the camcorder while the power
switch is set to "BD/DVD".
- there is no SD memory card in the camcorder while
the power switch is set to "SD CARD".
- the HDD, disc, or card does not have sufficient
remaining free space.
- An usable disc or card is inserted.
- the disc navigation screen is appearing.
- during playback
Reference
page
21, 37
156
—
60
40
99
21, 37
147
Advertisement
Table of Contents
