Wide-Angle Or Telephoto Effect; Using The Separately-Sold Lenses To Increase The Wide-Angle Or Telephoto Effect - Hitachi DZ-BD70A Instruction Manual

HDD BD-RE BD-R RAM -RW (VR)
Using the Separately-
Sold Lenses to
Increase the Wide-
Angle or Telephoto
Effect
Use the tele-conversion lens (DZ-
TL43 (separately-sold) to increase the
telephoto effect, and the wide-
conversion lens DZ-WL43
(separately-sold) to increase the
wide-angle effect.
If you choose another model, make
sure the filter diameter is 43mm and
the screw pitch 0.75mm.
Attaching the separately
sold lenses
Remove the lens cap from the
conversion lens and attach the
conversion lens to the camcorder
Conversion lens
1
64
-RW (VF)
R CARD
Notes
• If you attach the DZ-TL43
• When the tele-conversion lens or
• When you zoom while the
• When changing lenses, be careful
• Attaching a conversion lens will
• Some commercially sold
conversion lens, the focusing
range at the T (telephoto) side
will be from approx. 9.84 feet (3
m) to infinity.
wide-conversion lens is used, the
white balance may not function
depending on recording
conditions. (Normally, the white
balance will be automatically
adjusted.) In this event, adjust the
white balance manually (p.71).
conversion lens is attached, the
four corners of the screen may
become a little dark or scratchy at
the W (Wide) side. (The four
corners may not be evenly dark.)
not to drop the camcorder.
prevent you from using the flash.
Turn the "Flash" setting to "Off"
(p.74).
conversion lens may not be
compatible with this camcorder.