Recording Dark Subjects Using The Lcd Monitor Light (Assist Light) - Hitachi DZ-BD70A Instruction Manual

Selecting a recording
mode
During recording pause, press
1
MENU.
Select "Camera Functions Setup"
2
"Program AE"
Press the confirmation button to
confirm, then MENU to end.
The selected recording mode
(other than Auto) appears in the
3
LCD monitor (p.42).
• The recording mode is retained
in memory even when the
power is turned off.
Note
When recording in dark places,
after-images may appear if the
subject is moving or if camera
shake occurs. Use a tripod for best
results.
a recording mode
HDD BD-RE BD-R RAM -RW (VR)
Recording Dark
Subjects Using the
LCD Monitor Light
(Assist Light)
You can use the LCD monitor as a
light source which allows you to
record a subject up to 3.2 feet (1 m)
away even in a dark place.
To check images, use the viewfinder
(p.20).
Repeat steps 1 to 3 on the left
1 column to select "Low Light" for
recording mode in step 2.
Rotate the LCD monitor 180° so that
it faces the same direction as the
2
lens.
The LCD monitor will light
white.
Note
Moving subjects or camera shake
may cause after-images to appear.
Use a tripod for best results.
-RW (VF)
R CARD
69