Hitachi DZ-BD70A Instruction Manual page 146

Hitachi instruction manual camcorder dz-bd7ha, dz-bd70a
Hide thumbs Also See for DZ-BD70A:
Table of Contents

Advertisement

Symptom
An error occurs
during writing to
disc.
Transfer of images
stops.
The BD/DVD drive
of the PC cannot be
used after the
provided software
was installed.
An error appears
when starting
ImageMixer 3 HD
Edition for BDCAM.
Movies are not
recognized by
ImageMixer 3 HD
Edition for BDCAM
on the PC.
The DISC EJECT
switch does not work
when the camcorder
is connected to a PC.
When the time stamp
of a file on a disc is
viewed on a PC, it is
different from the
actual recording
time.
It takes a long time
to save a video
edited on the video
editor of ImageMixer
3 HD Edition for
BDCAM.
146
Cause and Correction
The temperature of the camcorder is too high due to
continuous operation.
Disconnect the camcorder from the PC, remove the disc
from the camcorder, and then turn it off. After a few
moments, connect them again and write to a brand-new
disc.
Is the disc scratched or dirty?
Clean the disc.
Do you use another software application to edit/write BD/
DVD? There may be a conflict between that software and
the ImageMixer 3 HD Edition for BDCAM software.
This problem may be solved if you update the other BD/
DVD editing/creating software of your PC.
Make sure that your PC display adapter (video card)
®
conforms to Direct X
9.0c.
Make sure the power switch of this camcorder is set to
"HDD" or "BD/ DVD".
While the camcorder is connected to the PC, use Explorer
to right-click the camcorder drive icon and select "Eject".
The file system of this camcorder is operated on
Greenwich Mean Time (GMT), and time lag information
has not been set. With Windows
time stamp of files viewed on Explorer looks different
from the actual recording time. The actual recording time
will appear for the date/time indication on the playback
screen.
If you are editing a video file whose contents are different
from those of the project settings, it may take some time,
since the entire video file must be re-encoded. Reconfirm
the project settings.
®
as of July, 2007, the
Reference
page
121
154
116
14
120

Advertisement

Table of Contents
loading

Table of Contents